Smart Products Filter Index - Do not delete

Bundle components: 

2.7/3.5 Set Straight Contains:
1 Straight Implants Tray
1 2.7mm Screw Rack
1 3.5mm Screw Rack
1 of each Plate
(24 pcs. total)
5 of each 2.7 Locking Screw
(10-46mm, 95 pcs.total)
5 of each 3.5 Locking Screw
(12-50mm, 100 pcs. total)

4.5mm broad
1.5mm thick
25.5 x 11.5mm long

Titanium, 

- Multiaxial Locking

- stainless steel

- Please use 2.7/3.5 bending irons for omnidirectional bending

- 2.7/3.5mm LeiLOX screws interchangeable

- screws fit also into LeiLOX TPLO plates

Rapid Luxation - Complete Set Star-Drive

Contents:

1 x Petite Rapid Luxation Plate
1 x Medium Rapid Luxation Plate
1 x Tall Rapid Luxation Plate
1 x Petite Patella Spacer 2mm left
1 x Petite Patella Spacer 2mm right
1 x Petite Patella Spacer 3mm left
1 x Petite Patella Spacer 3mm right
1 x Petite Patella Spacer 4mm left
1 x Petite Patella Spacer 4mm right
1 x Medium Patella Spacer 2mm left
1 x Medium Patella Spacer 2mm right
1 x Medium Patella Spacer 3mm left
1 x Medium Patella Spacer 3mm right
1 x Medium Patella Spacer 4mm left
1 x Medium Patella Spacer 4mm right
1 x Tall Patella Spacer 2mm left
1 x Tall Patella Spacer 2mm right
1 x Tall Patella Spacer 4mm left
1 x Tall Patella Spacer 4mm right
1 x Tall Patella Spacer 6mm left
1 x Tall Patella Spacer 6mm right
3 x 2.0 Screw Stardrive 6mm
3 x 2.0 Screw Stardrive 8mm
3 x 2.0 Screw Stardrive 10mm
3 x 2.0 Screw Stardrive 12mm
3 x 2.0 Screw Stardrive 14mm
3 x 2.0 Screw Stardrive 16mm
3 x 2.0 Screw Stardrive 18mm
3 x 2.0 Screw Stardrive 20mm
3 x 2.4 Screw Stardrive 6mm
3 x 2.4 Screw Stardrive 8mm
3 x 2.4 Screw Stardrive 10mm
3 x 2.4 Screw Stardrive 12mm
3 x 2.4 Screw Stardrive 14mm
3 x 2.4 Screw Stardrive 16mm
3 x 2.4 Screw Stardrive 18mm
3 x 2.4 Screw Stardrive 20mm
3 x 2.4 Screw Stardrive 22mm
3 x 2.4 Screw Stardrive 24mm
3 x 2.4 Screw Stardrive 26mm
3 x 2.4 Screw Stardrive 28mm
3 x 2.4 Screw Stardrive 30mm
3 x 2.4 Screw Stardrive 32mm
3 x 2.4 Screw Stardrive 34mm
3 x 2.4 Screw Stardrive 36mm
3 x 2.4 Screw Stardrive 38mm
3 x 2.4 Screw Stardrive 40mm
1 x Sterilization Tray with lid for Rapid Luxation, black
1 x Tibia Tappet Standard 2.4mm
1 x Tibia Tappet Petite 2.0mm
1 x 1.8mm Drill AO connection
1 x 1.5mm Drill AO connection
1 x Depth Gauge
1 x Saw Guide Tall
1 x Saw Guide Small
1 x Pin for Saw Guides
1 x Screwdriver Handle (AO Connection)
1 x Screwdriver Shaft Stardrive 8 (AO Connection)
1 x 2.5mm K-Wire for Saw Guide Standard
1 x 1.5mm K-Wire for Saw Guide Petite
1 x Drill Guide 1.5/1.8mm
1 x Plate Holding Forceps

For the LeiCOM Cannulated Compression Screws System, AO-connection

- Multiaxial Locking

- stainless steel

- Please use 2.0/2.4 bending irons for bending

- 2.0/2.4mm LeiLOX screws interchangeable

- screws fit also into LeiLOX 2.0/2.4 TPLO plates

-2.3mm thick & 7mm broad

1 Pair
For straight and reconstruction plates

Locking, Stainless steel

Through our partners. Set includes:

1.        Hall Microfree Mini-Driver - Refurbished

2.        2 New VOV Batteries

3.        Charger

4.        Transfer Shield

5.        PowerPro 5/32" Jacobs Chuck Attachment-Refurbished

6.        PowerPro Small AO Attachment-OneHand Operation-Refurbished

7.        PowerPro Small 2-Trigger Wire Driver-Refurbished

8.        PowerPro 1.8-4Mm Pin Driver-Refurbished

9.        Sagittal Saw Attachment-Refurbished (either CONMED or VOV Brand)

https://vimeo.com/410171100?fl=pl&fe=vl

Battery Tips:
To extend the life of Nickel-Metal Hydride (NiMH) batteries, avoid deep discharges, store them at roughly 50% charge in cool conditions, and avoid overcharging. Regularly cycle them (discharge/recharge) every 3-6 months to prevent capacity loss. Keep operating temperatures between 32° F and 104° F to prevent premature degradation.
- Avoid Deep Discharges: Do not run NiMH batteries down to 0% often; it is better to recharge them when they reach about 20-25% capacity.
- Avoid Overcharging: Remove from charger when the battery is full. Do not leave batteries in a charger for more than 20 hours.
- Storage Tips: For long-term storage, keep them in a cool, dry place (not the freezer) at
approximately 40-50% charge.
- Maintenance Cycling: Every 3-6 months, perform a full charge-discharge-charge cycle to keep the chemicals active and prevent voltage depression.
- Keep Them Cool: High heat (above 122° F) destroys NiMH cells. If they feel very hot after use or charging, let them cool before recharging or reusing.
- First-Time Use: Charge new NiMH batteries fully before their first use.

Titanium suture /bone anchor screws

With Spikes

Bundle components:

For "Tall" (2.4mm) Rapid Luxation Plate

Includes:

-Sawguide tall

-Pin (132-4030-10)

-K-Wire (144-1025-10)

• Extreme cutting precision
• Optimum performance
• Protection against wear and tear
• Coated in Titanium Nitride (TiN), one of the hardest and toughest materials in the medical field. TiN-coated sawblades last up to 5 times longer than regular sawblades.